1.5kV 6000A High-Capacity DC Disconnect Switch for Metro
IEC 61992-3 aligned | 6000A current capacity | Outdoor type
Specifications
| Model | ZGW1-1.5/6000 |
|---|---|
| Standard | IEC 61992-3 (DC disconnectors for railway fixed installations) and metro DC traction power supply technical conditions |
| Rated Voltage | DC 1500V (6000A rated current) |
| Design Speed | N/A (fixed installation equipment) |
| Operating Temperature | -40°C to +70°C |
| Altitude | ≤ 4,000 m |
| Materials | Dedicated DC arc-extinguishing contact system; hot-dip galvanized steel structure; high-strength insulation |
| Installation | Mounted in traction substations or trackside boxes; motorized or manual operation |
The ZGW1-1.5/6000 is a 1.5kV DC, 6000A high-capacity outdoor disconnect switch built for high-current metro and urban rail DC traction power supply systems. It provides electrical isolation where very high load currents must be carried and interrupted safely.
Designed with reference to IEC 61992-3 and metro DC traction power supply technical conditions, the switch uses a dedicated DC arc-extinguishing contact system to ensure reliable breaking at rated current. The hot-dip galvanized steel structure and high-strength insulation support long-term outdoor service from -40°C to +70°C at altitudes up to 4,000 m.
Typical installation is inside traction substations or in trackside boxes along the line. Motorized and manual operating mechanisms are both available, allowing integration into automated SCADA-controlled networks or simpler manual installations.
Contact Henan Chuangwei Railway Equipment Co., Ltd. for datasheets, type test reports and project quotations for the ZGW1 high-capacity series.
Frequently Asked Questions
When is the 6000A version required?
On metro lines whose DC traction network sections carry very high currents — typically near substations or on heavily loaded corridors — the 6000A rating provides the required current capacity and breaking reliability.
Which standard applies?
Designed with reference to IEC 61992-3 (DC disconnectors for railway fixed installations) and metro DC traction technical conditions.
Can it be integrated into SCADA systems?
Yes, with the motorized operating mechanism the switch supports remote control and SCADA integration.
Performance
Operating Conditions
Long-term outdoor service in high-current metro DC environments from -40°C to +70°C, altitudes to 4,000 m.
Mechanical
Heavy-duty galvanized steel frame and high-strength insulators rated for 6000A continuous current and frequent switching.
Electrical
Dedicated DC arc-extinguishing contact system ensures reliable breaking at 1500V DC / 6000A per IEC 61992-3.
Applications
Metro Substations
High-current DC isolation at traction substations.
Heavy Corridors
6000A capacity for heavily loaded DC sections.
Outdoor Service
Galvanized structure for open-air duty.
Cold Regions
Operation down to -40°C.