5-2 messenger wireterminal anchor clamp (AAT/ABG/AAG/BAT/CAT, 70~150mm²)
Specifications
| Model | 5-2AAT (70~120) , 5-2ABG, 5-2AAG150, 5-2BAT95/120, 5-2CAT95/120 |
|---|---|
| Drawing No. | 5-2 |
| Standard | TB/T 2075.5-2024, OCS fittings for electrified railways — Part 5: Terminal anchor clamps, |
| Installation | messenger wiretensioning termination anchor point |
The 5-2 messenger wire terminal anchor clamp (AAT/ABG/AAG/BAT/CAT types, 70~150mm2) for electrified railway OCS, for the messenger wire tensioning termination anchor, bearing and transfermessenger wiretension.
complies with TB/T 2075.5-2024, OCS fittings for electrified railways — Part 5: Terminal anchor clamps,requirements, per TB/T 2075.5-2024naming rules cover: AAT (≤200km/h·cone-sleeve type·copper alloy) , ABG (≤200km/h·double-eye wedge type·cast steel) , AAG (≤200km/h·cone-sleeve type·022Cr17Ni12Mo2stainless steel) , BAT (200~250km/h·cone-sleeve type·copper alloy) , CAT (250~350km/h·cone-sleeve type·copper alloy) , for messenger wire cross-sections of 70~150mm², wedge self-locking grip, reliable anchoring.
Product Overview
5-2The messenger wire terminal anchor clamp consists of a clamp body, wedges and related parts, the wedge structure self-locks tighter as tension rises, the split construction eases site installation and maintenance replacement; the AAG body and wedge sleeve use 022Cr17Ni12Mo2 stainless steel, for corrosive environment sections. The company holds CRCCrailway productcertification.
Key Features
- wedge self-locking principle, reliable grip
- copper alloy material, wear-resistant, corrosion-resistant
- split structure, easy site installation and replacement
- for messenger wire cross-sections ofrange70~150mm²
Compliance & Quality Control
Complies with TB/T 2075.5-2024, OCS fittings for electrified railways — Part 5: Terminal anchor clamps,, Products are controlled under CRCC railway product certification and the ISO9001 quality management system, with incoming material re-inspection and batch-by-batch factory inspection before delivery.
Operating Conditions & Typical Applications
for messenger wire tensioning terminations in OCS systems, Typical applications include stations,, messenger wire tensioning points and mid-point anchor related fixing locations on sections.
Selection & Service
The company provides end-to-end service from selection calculations and drawing confirmation to volume supply and on-site technical guidance. For technical support and commercial inquiries, please call 0375-6051688.
